580 LLDP Commands
The receive function accepts incoming LLDPDU frames and stores
information about the remote stations. Both local and remote data may be
displayed by the user interface and retrieved using SNMP as defined in the
LLDP MIB definitions. The component maintains one remote entry per
physical network connection.
The LLDP component manages a number of statistical parameters
representing the operation of each transmit and receive function on a per-port
basis. These statistics may be displayed by the user interface and retrieved
using SNMP as defined in the MIB definitions.
Commands in this Chapter
This chapter explains the following commands:
clear lldp remote-data
Use the clear lldp remote-data command in Privileged EXEC mode to delete
all LLDP information from the remote data table.
Syntax
clear lldp remote-data
clear lldp remote-data lldp receive show lldp med
clear lldp statistics lldp timers show lldp med interface
lldp med lldp transmit show lldp med local-device
detail
lldp med confignotification lldp transmit-mgmt show lldp med remote-
device
lldp med
faststartrepeatcount
lldp transmit-tlv show lldp remote-device
lldp med transmit-tlv show lldp show lldp statistics
lldp notification show lldp interface –
lldp notification-interval show lldp local-device –
2CSPC4.XCT-SWUM2XX1.book Page 580 Monday, October 3, 2011 11:05 AM