Denial of Service Commands 1401
no dos-control tcpfrag
Default Configuration
Denial of Service is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example activates TCP Fragment Denial of Service protection.
console(config)#dos-control tcpfrag
ip icmp echo-reply
Use the ip icmp echo-reply command to enable or disable the generation of
ICMP Echo Reply messages. Use the no form of this command to prevent the
generation of ICMP Echo Replies.
Syntax
ip icmp echo-reply
no ip icmp echo-reply
Default Configuration
ICMP Echo Reply messages are enabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
2CSPC4.XCT-SWUM2XX1.book Page 1401 Monday, October 3, 2011 11:05 AM