System Management Commands 1595
reload
Use the reload command in Privileged EXEC mode to reload stack members.
Syntax
reload [
stack–member–number
]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If no unit is specified, all units are reloaded.
Example
The following example displays how to reload the stack.
console#reload 1
Management switch has unsaved changes.
Would you like to save them now? (y/n)n
Configuration Not Saved!
Are you sure you want to reload the switch? (y/n) y
Reloading management switch 1.
Parameter Description
stack–member–number The stack member to be reloaded.
2CSPC4.XCT-SWUM2XX1.book Page 1595 Monday, October 3, 2011 11:05 AM