Multicast Commands 1091
Example
console#show ip pim bsr-router candidate
BSR Address............................. 192.168.10.1
BSR Priority............................ 0
BSR Hash Mask Length.................... 30
C-BSR Advertisement Interval (secs)........60
Next Bootstrap message(hh:mm:ss).......... NA
If no configured/elected BSRs exist on the router, the following message is
displayed.
No BSR’s exist/learned on this router.
show ip pim interface
The show ip pim interface command displays the PIM interface status
parameters. If the interface number is not is specified, the command displays
the status parameters of all the PIM-enabled interfaces. This command
deprecates the show ip pimsm interface stats, show ip pimsm interface and
show ip pimdm interface commands.
Syntax
show ip pimsm interface [ vlan
vlan-id
]
•
vlan-id
— A valid VLAN ID for which multicast routing has been enabled.

Field Descriptions

Field Description
Mode Active PIM Protocol
Interface Interface number
Hello Interval Hello interval value
Join-prune Interval Join-prune interval value
DR Priority DR Priority configured on this interface
2CSPC4.XCT-SWUM2XX1.book Page 1091 Monday, October 3, 2011 11:05 AM