88 Command Groups
Email Alerting
ip arp inspection limit Configures the rate limit and burst interval
values for an interface.
IC
ip arp inspection trust Configures an interface as trusted for Dynamic
ARP Inspection.
IC
ip arp inspection validate Enables additional validation checks like source
MAC address validation, destination MAC
address validation or IP address validation on
the received ARP packets.
GC
ip arp inspection vlan Enables Dynamic ARP Inspection on a single
VLAN or a range of VLANs.
GC
permit ip host mac host Configures a rule for a valid IP address and
MAC address combination used in ARP packet
validation.
ARPA
show arp access-list Displays the configured ARP ACLs with the
rules.
PE
show ip arp inspection
interfaces
Displays the Dynamic ARP Inspection
configuration.
PE
show ip arp inspection
interfaces
Displays the Dynamic ARP Inspection
configuration on all the DAI enabled interfaces.
PE
show ip arp inspection vlan Displays the Dynamic ARP Inspection
configuration on all the VLANs in the given
VLAN range.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Modea
logging email Enables email alerting and sets the lowest
severity level for which log messages are
emailed.
GC
logging email urgent Sets the lowest severity level at which log
messages are emailed in an urgent manner.
GC
logging traps Sets the lowest severity level at which SNMP
traps are logged.
GC
Command Description Modea
2CSPC4.XCT-SWUM2XX1.book Page 88 Monday, October 3, 2011 11:05 AM