1560 Syslog Commands
<190> JAN 10 18:59:17 10.27.21.22-2
CLI_WEB[209809328]: cmd_logger_api.c(260) 369 %%
[CLI:----:EIA-232] Access level of user admin has been
set to 15
If enabled, the CLI command logger subsystem begins to log commands
immediately after the user is authenticated. After authentication, the CLI
generates an explicit message and invokes the command logger. The format of
the message at login is:
<189> JAN 10 18:58:56 10.27.21.22-2
CMDLOGGER[209809328]: cmd_logger_api.c(83) 361 %%
CLI:10.27.21.22:admin:User admin logged in
<190> JAN 10 18:58:56 10.27.21.22-2
CLI_WEB[209809328]: cmd_logger_api.c(260) 362 %%
[CLI:admin:10.27.21.22] User has successfully logged
in
The CLI command log subsystem also logs a ll user log out instances. The
format of the log message is:
<190> JAN 10 19:01:04 10.27.21.22-2
CLI_WEB[209809328]: cmd_logger_api.c(260) 382 %%
[CLI:admin:10.27.21.22] User has logged out
Commands in this Chapter
This chapter explains the following commands:
clear logging logging file
clear logging file logging on
description logging snmp
level logging web-session
logging cli-command port
logging show logging
logging audit show logging file
logging buffered show syslog-servers
2CSPC4.XCT-SWUM2XX1.book Page 1560 Monday, October 3, 2011 11:05 AM