582 LLDP Commands
lldp med
This command is used to enable/disable LLDP-MED on an interface. By
enabling MED, the transmit and receive functions of LLDP are effectively
enabled.
Syntax Description
lldp med
no lldp med
Parameter Ranges
Not applicable
Command Mode
Interface (Ethernet) Configuration
Default Value
LLDP-MED is disabled on all supported interfaces.
Usage Guidelines
No specific guidelines.
Example
console(config)#interface gigabitethernet 1/0/1
console(config-if-1/0/1)#lldp med
lldp med confignotification
This command is used to enable sending the topology change notification.
Syntax Description
lldp med confignotification
no lldp med confignotification
2CSPC4.XCT-SWUM2XX1.book Page 582 Monday, October 3, 2011 11:05 AM