1302 Auto-Install Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The show switch command also displays the switch firmware synchronization
status.
Example
console#show auto-copy-sw
Stack Firmware Synchronization
Synchronization: Enabled
SNMP Trap status: Enabled
Allow Downgrade: Enabled
show boot
Use the show boot command in Privileged EXEC mode to display the auto
install configuration and the status.
Syntax
show boot
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
2CSPC4.XCT-SWUM2XX1.book Page 1302 Monday, October 3, 2011 11:05 AM