Configuration and Image File Commands 1389
Images currently available on Flash
------------------------------------------------------------------
unit image1 image2 current-active next-active
------------------------------------------------------------------
1 0.31.0.0 0.31.0.0 image2 image2
show running-config
Use the show running-config command in Privileged EXEC mode to display
the contents of the currently running configuration file, including banner
configuration. The command only displays the configurations that are non-
default.
NOTE: All non-default configurations for the Captve Portal brand ing images and
encoded Unicode are not displayed via the standard show running -config
command. If desired, you can view this data in the script files or by using the al l
mode for the show running-config command. In addition, please note that this non-
readable data is contained and displayed at the end of the script files.
Syntax
show running-config [

all

|
scriptname
]
•
all
-—To display or capture the commands with settings and
configuration that are equal to the default value, include the
all
option.
•
scriptname
-—If the optional
scriptname
is provided, the output is
redirected to a script file.
NOTE: If you issue the show running-config command from a serial connection,
access to the switch through remote connections (such as Telnet) is suspended
while the output is being generated and displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
2CSPC4.XCT-SWUM2XX1.book Page 1389 Monday, October 3, 2011 11:05 AM