Port Channel Commands 635
User Guidelines
No specific guidelines.
Example
console#show interfaces port-channel
Channel Ports ChType Hash Algorithm Type min-Links
------- ------------------ ------- ------------------- ---------
Po1 Inactive: Gi1/0/3 Dynamic 3 1
Po2 No Configured Ports Static 3 1
Hash Algorithm Type
1 - Source MAC, VLAN, Ethertype, source module and port ID
2 - Destination MAC, VLAN, Ethertype, source module and port ID
3 - Source IP and source TCP/UDP port
4 - Destination IP and destination TCP/UDP port
5 - Source/Destination MAC, VLAN, Ethertype, source MODID/port
6 - Source/Destination IP and source/destination TCP/UDP port
7 - Enhanced hasing mode
show lacp
Use this command in Privileged EXEC mode to display LACP information
for Ethernet ports.
Syntax
show lacp {gigabitethernet
unit/slot/port
|
port-channel

port-channel-

number
| tengigabitethernet
unit/slot/port
[{parameters | statistics}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
2CSPC4.XCT-SWUM2XX1.book Page 635 Monday, October 3, 2011 11:05 AM