806 VLAN Commands
Syntax
vlan protocol group remove
groupid
•
groupid
— The protocol-based VLAN group ID, which is automatically
generated when you create a protocol-based VLAN group with the
vlan
protocol group
command. To see the group ID associated with the name
of a protocol group, use the
show port protocol all
command.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the removal of the protocol-based VLAN
group identified as "2."
console(config)#vlan protocol group remove 2
vlan routing
Use the vlan routing command to enable routing on a VLAN. Use the no
form of this command to disable routing on a VLAN.
Syntax
vlan routing {vlanid [ index]}
Parameter Description
Parameter Description
vlanid Valid VLAN ID (Range 1–4093).
2CSPC4.XCT-SWUM2XX1.book Page 806 Monday, October 3, 2011 11:05 AM