1084 Multicast Commands
Forbidden addresses: 1
The following table shows the information the command displays:
show ip multicast
Use the show ip multicast command in Privileged EXEC mode to display the
system-wide multicast information.
Syntax
show ip multicast
Syntax Description
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes
User Guidelines
This command has no user guidelines.
Field Description
Capacity The maximum number of addresses that can be stored in the
multicast address table.
Used The total number of addresses in the multicast address table.
Static addresses The number of addresses in the multicast address table that are
static IP addresses.
Dynamic
addresses
The number of addresses in the multicast address table that were
learned dynamically.
Forbi d de n
addresses
The number of addresses in the multicast address table that are
forbidden IP addresses.
2CSPC4.XCT-SWUM2XX1.book Page 1084 Monday, October 3, 2011 11:05 AM