IPv6 Routing Commands 1015
Command Mode
Global Configuration
ipv6 host
The ipv6 host command is used to define static host name-to- ipv6 address
mapping in the host cache.
Syntax
ipv6 host
name
ipv6-address
no ipv6 host
name
•
name
— Host name.
•
ipv6-address
— IPv6 address of the host.
Default Configuration
No IPv6 hosts are defined.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines.
Example
console(config)#ipv6 host Dell 2001:DB8::/32
ipv6 mld last-member-query-count
The ipv6 mld last-member-query-count command sets the number of
listener-specific queries sent before the router assumes that there are no local
members on the interface. Use the “no” form of this command to set the last
member query count to the default.
Syntax
ipv6 mld last-member-query-count
last-member-query-count
2CSPC4.XCT-SWUM2XX1.book Page 1015 Monday, October 3, 2011 11:05 AM