IGMP Snooping Commands 485
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC
User Guidelines
This command has no user guidelines.
show ip igmp snooping groups
Use the show ip igmp snooping groups command in User EXEC mode to
display the Multicast groups learned by IGMP snooping.
Syntax
show ip igmp snooping groups [vlan
vlan-id
]
[address
ip-multicast-address
]
•
vlan_id —
Specifies a VLAN ID value.
•
ip-multicast-address —
Specifies an IP Multicast address.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The example shows Multicast groups learned by IGMP snooping for a ll
VLANs.
console>show ip igmp snooping groups
Vlan IP Address Ports
2CSPC4.XCT-SWUM2XX1.book Page 485 Monday, October 3, 2011 11:05 AM