474 GVRP Commands
console(config-if-1/0/8)#gvrp registration-forbid
gvrp vlan-creation-forbid
Use the gvrp vlan-creation-forbid command in Interface Configuration mode
to disable dynamic VLAN creation. To disable dynamic VLAN creation, use
the no form of this command.
Syntax
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid
Default Configuration
By default, dynamic VLAN creation is enabled.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet)
mode
User Guidelines
This command has no user guidelines.
Example
The following example disables dynamic VLAN creation on port 1/0/8.
console(config)#interface gigabitethernet 1/0/8
console(config-if-1/0/8)#gvrp vlan-creation-forbid
show gvrp configuration
Use the show gvrp configuration command in Privileged EXEC mode to
display GVRP configuration in formation. Timer values are d isplayed. Other
data shows whether GVRP is enabled and which ports are running GVRP.
2CSPC4.XCT-SWUM2XX1.book Page 474 Monday, October 3, 2011 11:05 AM