Dell enable password

AAA Commands 249
Command Mode
Line Configuration mode
User Guidelines
Use of the no form of the command does not disable authentication. Instead,
it sets the authentication list to the default list (same as enable
authentication default).
Example
The following example specifies the default authentication method when
accessing a higher privilege level console.
console(config)# line console
console(config-line)# enable authentication default
enable password
Use the enable password command in Global Configuration mode to set a
local passwo rd to control access to th e privilege d EXEC mode. To remove the
password requirement, use the no form of this command.
Syntax
enable password password [encrypted]
no enable password
• password — Password for this level (Range: 8- 64 characters).
•
encrypted — Encrypted password entered, copied from another switch
configuration.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
2CSPC4.XCT-SWUM2XX1.book Page 249 Monday, October 3, 2011 11:05 AM