OSPFv3 Commands 1219
INTRA 4.4.4.4 10 0.0.0.1 FE80::210:18FF:FE82:8E1 vlan12
show ipv6 ospf border-routers
Use the show ipv6 ospf command to display internal OSPFv3 ro utes to reach
Area Border Routers (ABR) and Autonomous System Boundary Routers
(ASBR). This command takes no options.
Syntax
show ipv6 ospf border-routers
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode.
show ipv6 ospf database
Use the show ipv6 ospf database command in Privileged EXEC mode to
display information about the link state database when OSPFv3 is enabled. If
no parameters are entered, the command displays the LSA headers. Optional
parameters specify the type of link state advertisements to display.
The information below is only displayed if OSPF is enabled.
Syntax
show ipv6 ospf [
area-id
] database [{external | inter-area {prefix | router} |
link | network | nssaexternal | prefix | router | unknown [area | as | link]}]
[

link-state-id

] [adv-router [

router-id

] | self-originate]
•
area-id
— Identifies a specific OSPF area for which link state database
information will be displayed.
•
external —
Displays the external LSAs.
•
inter-area —
Displays the inter-area LSAs.
•
link —
Displays the link LSAs.
•
network —
Displays the network LSAs.
2CSPC4.XCT-SWUM2XX1.book Page 1219 Monday, October 3, 2011 11:05 AM