Command Groups 99
iSCSI OptimizationLink Dependency
Command Description Modea
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
iscsi aging time Sets aging time for iSCSI sessions. GC
iscsi cos Sets the quality of service profile that will be
applied to iSCSI flows.
GC
iscsi enable Enables Global Configuration mode command
globally enables iSCSI awareness.
GC
iscsi target port Configures an iSCSI target port (optionally
configures target port address and name).
GC
show iscsi Displays the iSCSI settings. PE
show iscsi sessions Displays the iSCSI sessions. PE
Command Description Modea
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
action Indicates if the link-dependency group should
mirror or invert the status of the depended on
interfaces.
LD
link-dependency group Enters the link-dependency mode to configure
a link-dependency group.
GC
add gigabitethernet Adds member gigabit Ethernet port(s) to the
dependency list.
LD
add tengigabitethernet Adds member ten gigabit Ethernet port(s) to
the dependency list.
LD
add port-channel Adds member port-channels to the
dependency list.
LD
depends-on Adds the dependent Ethernet ports or port
channels list.
LD
show link-dependency Shows the link dependencies configured on a
particular group.
PE
2CSPC4.XCT-SWUM2XX1.book Page 99 Monday, October 3, 2011 11:05 AM