System Management Commands 1611
Default Configuration
This command has no default configuration.
Command Mode
User EXEC
User Guidelines
The command has no user guidelines.
show supported cardtype
Use the show supported cardtype command in User EXEC mode to display
information about all card types supported in the system. If a card index is
entered, then the command displays information about specific card types
supported in the system. Card index values are specific to each family of
products. Use the generic form (without specifying an index) to display all the
card types for a product family.
Syntax
show supported cardtype [
cardindex
]
•
cardindex
— Displays the index into the database of the supported card
types. This index is used when preconfiguring a slot.
The following table explains the output parameters.
Parameter Description
Inserted Card Model Identifier The model identifier of the card inserted
in the slot. Model identifier is a 32-
character field used to identify a card.
This field is displayed only if the slot is
full.
Inserted Card Description The card description. This field is
displayed only if the slot is full.
Configured Card Description The description of the card preconfigured
in the slot.
2CSPC4.XCT-SWUM2XX1.book Page 1611 Monday, October 3, 2011 11:05 AM