1446 Power Over Ethernet Commands
power inline
The power inline command enables/disables the ability of the port to deliver
power.
Syntax Description
power inline { auto | never }
no power inline
•
auto
— Enables the device discovery protocol and, if found, supplies
power to the device.
•
never
— Disables the device discovery protocol and stops supplying power
to the device.
Command Mode
Interface Configuration (Ethernet).
Usage Guidelines
No specific guidelines.
Default Value
auto
Examples
console(config)#interface gigabitethernet 1/0/1
power inline power inline priority enable
power inline detection power inline reset
power inline high-power power inline usage-threshold
power inline limit clear power inline statistics
power inline management show power inline
power inline powered-device show power inline firmware-version
power inline priority
2CSPC4.XCT-SWUM2XX1.book Page 1446 Monday, October 3, 2011 11:05 AM