342 DHCP Layer 2 Relay Commands
Example
console#show dhcp l2relay remote-id vlan 200
DHCP L2 Relay is Enabled.
VLAN ID Remote Id
-------- -------------
200 remote_22
clear dhcp l2relay statistics interface
Use the show dhcp l2relay statistics interface command in Privileged EXEC
mode to reset the DHCP L2 Relay counters to zero. Specify the port with the
counters to clear, or use the all keyword to clear the counters on all ports.
Syntax
clear dhcp l2relay statistics interface {all |
interface-id
}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Parameter Description
all Show all interfaces.
interface-id A physical interface.
2CSPC4.XCT-SWUM2XX1.book Page 342 Monday, October 3, 2011 11:05 AM