1074 Multicast Commands
Syntax
ip pim bsr-candidate vlan {
vlan-id hash-mask-length bsr-priority
[interval
interval
]}
no ip pim bsr-candidate vlan {
vlan-id}
Parameter Description
Default Configuration
None - the router does not advertise itself as a BSR candidate.
Command Mode
Global Configuration mode
User Guidelines
All multicast groups with the same hash value correspond to the same RP.
Lower priority values are preferred.
Example
console(config)#ip pim bsr-candidate vlan 10 16 0
interval 30
Parameter Description
vlan-id A valid VLAN identifier with multicast routing enabled.
hash-mask-length Length of the BSR hash to be
ANDed with the multicast
group address. (Range 0–32 bits). Default 0.
bsr-priority The advertised priority of the BSR candidate. Range 0-255.
Default 0.
interval (Optional) Indicates the RP candidate advertisement interval.
The range is from 1 to 16383 seconds. The default value is 60
seconds.
2CSPC4.XCT-SWUM2XX1.book Page 1074 Monday, October 3, 2011 11:05 AM