1638 System Management Commands
Default Configuration

port —

Telnet port (decimal 23) on the host.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
Following is an example of using the telnet command to connect to
176.213.10.50.
console#telnet 176.213.10.50
Esc U sends telnet EL
traceroute
Use the traceroute command in Privileged EXEC mode to discover the IP
routes that packets actually take when traveling to their destinations.
You can use traceroute command in either of two formats:
• You can specify the IP address and hostname in the command. The
traceroute
{
ipaddress
|
hostname
}
command sets the parameters to their
default values.
•You can enter
traceroute
to without specifying the IP address and
hostname, and specify values for the traceroute parameters.
Syntax
traceroute [ ip | ipv6 ]
ipaddress
|
hostname
[ initTtl

initTtl

] [ maxTtl

maxTtl

] [ maxFail

maxFail

] [ interval
interval
] [ count
count
] [ port
port
]
[ size
size
]
•

ipaddress

— Valid IP address of the destination host.
2CSPC4.XCT-SWUM2XX1.book Page 1638 Monday, October 3, 2011 11:05 AM