Epson S1C33L03 manual 96

8 ELECTRICAL CHARACTERISTICS

Common characteristics

1) 3.3 V/5.0 V dual power source

(Unless otherwise specified: VDDE=5.0V±0.5V, VDD=2.7V to 3.6V, VSS=0V, Ta=-40°C to +85°C)

	Item		Symbol	Min.	Max.	Unit	∗
	Address delay time		tAD	–	8	ns	1
	#CEx delay time (1)		tCE1	–	8	ns
	#CEx delay time (2)		tCE2	–	8	ns
	Wait setup time		tWTS	15	–	ns
	Wait hold time		tWTH	0	–	ns
	Read signal delay time (1)		tRDD1		8	ns	2
	Read data setup time		tRDS	12		ns
	Read data hold time		tRDH	0		ns
	Write signal delay time (1)		tWRD1		8	ns	3
	Write data delay time (1)		tWDD1		10	ns
	Write data delay time (2)		tWDD2	0	10	ns
	Write data hold time		tWDH	0		ns
2) 3.3 V single power source
		(Unless otherwise specified: VDDE=VDD=2.7V to 3.6V, VSS=0V, Ta=-40°C to +85°C)
	Item		Symbol	Min.	Max.	Unit	∗
	Address delay time		tAD	–	10	ns	1
	#CEx delay time (1)		tCE1	–	10	ns
	#CEx delay time (2)		tCE2	–	10	ns
	Wait setup time		tWTS	15	–	ns
	Wait hold time		tWTH	0	–	ns
	Read signal delay time (1)		tRDD1		10	ns	2
	Read data setup time		tRDS	15		ns
	Read data hold time		tRDH	0		ns
	Write signal delay time (1)		tWRD1		10	ns	3
	Write data delay time (1)		tWDD1		10	ns
	Write data delay time (2)		tWDD2	0	10	ns
	Write data hold time		tWDH	0		ns
3) 2.0 V single power source
		(Unless otherwise specified: VDDE=VDD=2.0V±0.2V, VSS=0V, Ta=-40°C to +85°C)
	Item		Symbol	Min.	Max.	Unit	∗
	Address delay time		tAD	–	20	ns	1
	#CEx delay time (1)		tCE1	–	20	ns
	#CEx delay time (2)		tCE2	–	20	ns
	Wait setup time		tWTS	40	–	ns
	Wait hold time		tWTH	0	–	ns
	Read signal delay time (1)		tRDD1		20	ns	2
	Read data setup time		tRDS	40		ns
	Read data hold time		tRDH	0		ns
	Write signal delay time (1)		tWRD1		20	ns	3
	Write data delay time (1)		tWDD1		20	ns
	Write data delay time (2)		tWDD2	0	20	ns
	Write data hold time		tWDH	0		ns

∗note 1) This applies to the #BSH and #BSL timings.

2)This applies to the #GAAS and #GARD timings.

3)This applies to the #GAAS timing.

A-80 EPSON S1C33L03 PRODUCT PART