404 Ethernet Configuration Commands
NOTE: Additional forms of the interface command enable configurin g VLANs,
tunnels, the loopback interface, the out-of-band interfa ce, and ranges of interfaces.
See interface vlan, interface tunnel, interface loopba ck, and interface range.
Syntax
interface {gigabitethernet
unit/slot/port
|
port-channel
port-channel-number

| tengigabitethernet
unit/slot/port
}
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
Interface Configuration
User Guidelines
It is possible to enter interface configuration mode from global configuration
mode or from interface configu ration mode.
Example
The following example enables gigabit port 2 on stack member 1 for
configuration.
console(config)# interface gigabitethernet 1/0/2
console (config-if)#
interface range
Use the interface range command in Global Configuration mode to execute a
command on multiple ports at the same time.
NOTE: An additional form of this command enables configuring a range of VLAN s.
See interface range vlan.
Syntax
interface range {

port-rang

e |

port-type

all}
2CSPC4.XCT-SWUM2XX1.book Page 404 Monday, October 3, 2011 11:05 AM