DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
What’s New in Release 8.2r
xi
Tool s
No new tools became availab le with Release 8.2r.
Commands, screens, and fields
No new commands and sc reens became available or were affected by Release
8.2r.
Procedures
The following procedures and steps changed or were ad ded because of
problems identified in the laboratory or during early introd uction.
Many of the upgrade p rocedures were reordered and the step s within the
procedure better d efined. Check the task tables at the b eginning of each
upgrade c hapter for the current order.
Also, to reduce redund ancy in the book, there is no longer a sepa rate upgrade
process for high or cr itical reliability. The procedures and steps that ap ply to high
or critical reliability are noted where they occur in the upgrad e process.
Procedure Steps Notes
Check SPE 1. Type status spe and pr e s s
Enter to chec k the health of
the SPE.
Becomes first step of
upgrade procedure
Install the Circuit
Packs 1. Insert the TN1650B
memory circuit pac k in
memory slot 3.
Adding memory to the
stand by SPE c auses an error
because the memory number
between the standby and
active carriers does not
match.
This requires an additional
power down of the carrier.