DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory
1-12Upgrade the software and hardware
1
Install the Circuit Packs
NOTE:
To properly seat a circuit pack, p ush firmly on the front of the faceplate un til
the latch reaches the bottom rail of the carrier. Then close the latch until it is
fully engaged.
1. Insert the TN1650B memory circuit pac k in memory slot 3.
NOTE:
If a high or critical reliab ility system, install the TN1650B at the same
time as the optical drive. No te that adding memory to the stand by
SPE caus es an er ror be caus e the me mory n umbe r betw een the
standby and ac tive carriers does not match.
2. Insert the UN332C circuit pac k into the MSSNET slot.
3. Replace the blank facep late next to the MSSNET circuit pack.
4. Insert the TN2211 optical drive (Figure 1-1) into the right most TAP E DRIVE
slot. It only takes up 2 slots.
5. Place a blank faceplate ov er the left most TAPE DRIVE slot.
Figure 1-1. TN2211 Optical Drive
Red
Green
Yellow
fpdf2211 KLC 010600
TN2211 OPTICAL DRIVE