DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-77Add IP Interface Assembly
6
10. Click Start > Shut Down and select Restart the computer?
or on the TN802:
Press the recessed reset button on the facep late (see Figure 6-26) until
the LCD shows a flashing MSHUT *. When the flashing stops and the
asterisk disappears (ab out 2 min), reseat the circuit pac k to restart the
system.
or on the SAT:
a. Type busyout board
UUCSS
and press Enter .
b. Type reset board
UUCSS
and press Enter.
c. Type release board
UUCSS
and press Enter.
Once the system is comp letely initialized, the LCD reads MEDPRO *.
!WARNING:
When connected remotely via pc ANYWHERE, only use the
pcANYWHERE Restart Host Computer button on the toolbar to
restart Windows NT.
11. Affix the new TN802B label to the circuit p ack.
12. Disconnect the monitor, keyb oard, and mouse.