DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
G3vs with Intel 386 or Risc Processor to R8r
4-17Upgrade Completion
4
Enable Customer Options and Alarm Origination
to INADS
1. Get the DOSS order number of th e u pgrade from the project manager and
ask the regional Customer Software Administration to com plete the steps
in the shaded box. See ‘‘Where to Call for Technical Suppor t’’ on page -xx
for telephone numbers.
NOTE:
As part of the system registration p rocess, the INADS Database
Administrator enables Alarm O rigination.
2. When administration is completed , log in as craft at the Login: prompt.
Administration:
1. Log in as init at the Login: prompt.
2. Type change system-parameters customer-options and press Enter
to verify that the customer options are p roperly set.
3. Go to screen 6, QSIG Optional Features, and set the Basic Call
Setup field to y if the customer was using Supplementary Services
Protocol b or d on an ISDN-PRI trunk group before the up grade.
4. Type change system-parameters offer-options and press Enter.
5. Set the Activate Offer field to y and press Tab . A warning message
lets you know the offer category along with the model to determi ne the
system capacities (limi ts) and allowable hardware.
6. Press Enter to effect the ch anges.
7. When done, contact the field technician.
8. Contact the requester when done .