DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory
1-4Task Tables
1
Tas k Ta ble s
Table 1-2 lists the high-level tasks to perfor m the upgrades. Refer to the
appropriate pag e for instructions for each step .
The upgrade proc edure is similar for both the stand ard and high or critic al
reliability system with a few excep tions. These exceptions are noted as you g o
through the steps.
Table 1-2. Tasks to upgrade the software and hardware
√Task Description Page
Check SPE 1-6
Save Translations 1-6
Save Announcements (if necessary) 1-6
Back Up Disk 1-6
Disable Scheduled Maintenance and Alarm Origination to INADS 1-7
Reconfigure the Tape (G3rV2, V3 R31.0 and Earlier) 1-6
Check Link Status 1-8
Disable TTI 1-8
Check Disk Drive 1-8
Install Disk Drive (if not TN1657 V4 or earlier) 1-9
Restore Disk 1-9
Check TTI Status 1-10
Busyout MMI Circuit Packs (H/C only) 1-10
Lock the active SPE (H/C only) 1-10
Check the active tone-clock (H/C only) 1-11
Power Down the Processor Carrier 1-11
Remove the Circuit Packs 1-11
Install the Circuit Packs 1-12
Power Up the Processor Carrier 1-14
Unlock the Active SPE (H/C only) 1-14
Continued on next page