DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-44Add DCS Interface
6
Enter Added Translations
1. Get the DOSS order number of the upgrad e. Call the regional CSA to
perform the steps in this sec tion.
2. To enable DCS, set the DCS field on the System Parameters-Customer
Options screen to y.
3. Administer the other required translatio n data using the forms listed under
Distributed Communications System (DCS) in

DEFINITY Communications

System Administration for Network Connectivity

.
Save Translations
1. If the system is high- or critic al-reliability, type status spe and press Enter
to verify that the standby SPE is refreshed and that the standb y disk is in
service.
2. Enter save translation [spe-a or both] disk and press Enter . This
command instructs the system to take all translation information in
memory and write it to the disk(s).
Table 6-3. TN799 Pinout
Backplane Pin 25-Pair Wire Color Lead Name
Peripheral
Connector Pin
103 White/Orange TD+ 27
003 Orange/White TD- 2
104 White/Green RD+ 28
004 Green/White RD- 3