Lucent Technologies R8r Adding or Removing Cabinet Hardware

Adding or Removing Cabinet Hardware
6-1Single-Mode Fiber Attenuators
6
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1 April 2000
6
Adding or Removing Cabinet
Hardware
This chapter contains information t o add or remove cab inet hardware. To install
adjunct or perip heral equipment, refer to
DEFINITY Enterprise Communications
Server Release 8 Installation for Adjuncts and Peripheral s
.
To add fiber optic cab les to an existing system, refer to
DEFINITY Enterprise
Communications Server Release 8 Installation and Test for Multicarrier Cabinets.
Single-Mode Fiber Attenuators
Attenuators may be required when us ing single-mode fib er. See the table below.
A different value attenuator may be required even though the fiber sp an is
between the same 2 cabinets (lo cal and remote cab inet). Refer to
DEFINITY
Enterprise Communications Server Release 8 Installation and Test for Multicarrier
Cabinets
for detailed fiber attenuato r information.
106060718 5 dB attenuator 2 for each fiber connec tion
106060734 10 dB attenuator 2 for each fiber connec tion
106061021 15 dB attenuator 2 for each fiber connec tion