DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory
1-22Upgrade the software and hardware
1
Check SPE status (H/C only)
1. Type status SPE and press Enter. Wait until
■The Standby Refreshed field s hows yes
■The Standby Shadowing field s hows on
■The Standby Handshake field s hows up
Save Translations
1. Type save translation and press Enter to copy up graded transl ations to
the system disk, which takes ab out 2 minutes.
Save Announcements (if necessary)
1. Type save announcements and press Enter to copy announcements to
the system disk.
"init" login administration:
1. Log in as init.
2. Type change system-parameters customer-options and press Enter
to verify that the customer options are p roperly set.
3. Go to screen 6, QSIG Optional Features, and set the Basic Call
Setup field to y if the customer was using Supplementary Services
Protocol b or d on an ISDN-PRI trunk group before the up grade.
4. Type change system-parameters offer-options and press Enter.
5. If the Activate Offer field is n, set it to y and press Tab. A warning
message lets you know whether you need to save translations and
reboot to make the change p ermanent.
6. Press Enter to effect the ch anges or Cancel if there were no chang es.
7. Contact the requester when done .