DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-18Add the Fiber Optic Cable
6
Figure 6-9. Cable Disconnect Label
11. Close the rear door.
!CAUTION:
Avoid bending fiber optic c ables to a radius smaller than 1.5 inc hes
(3.8 cm), to prevent mechanic al stress on the cables. Plan the use of
cable ties to avoid c rimping the c able or creating a fixed stress point
where, at a later time, movement of the cable cause s it to exceed the
minimum bend radius.
!CAUTION:
Be careful not to crimp the fib er cable when you are p erforming the
following step.
12. Replace the fan cover. See Figure 6-10.
Figure Notes
1. To outside plant fiber
prda0001RPY 021898
1