DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-58Add IP Interface Assembly
6
Figure 6-24. TN802B IP Interface External Cable Assembly
3. Read and follow any directions i nserted into the pac kage by the factory.
Connect the Cables
1. Determine into which port slot you are p utting the TN802B IP Interface.
NOTE:
Make sure that at least 3 adjoining slots are free.
2. From the rear of the cabinet, connect the amphenol connector on the
external cable assembl y to the backplane c onnector correspond ing to
that slot (the highest numbered c onnector of the 3 slots required ).
Figure Notes
1. Amphenol connec tor to connector
corresponding to TN802B slot
2. To VGA monitor
3. To USB (not used)
4. To keyboard
5. To mouse
6. To ethernet
7. 25-pin male conne ctor to modem
8. 25-pin male connec tor to COM2
cbdfoctoAWF 122398
2
1
3
45
6
78