DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Upgrading G3rV2, V3, V4 to R8r and Adding Memory
1-7Upgrade the software and hardware
1
Disable Scheduled Maintenance and Alarm Origination to INADS
1. To prevent scheduled daily maintenanc e from interfering with the upd ate
or upgrade, typ e change system-parameters maintenance and press
Enter.
2. If scheduled maintenanc e has begun, set the Stop Time field to 1 mi nute
after the current time.
or
If scheduled maintenanc e has not begun, set the Start Time field to a
time after the upgrade is completed. For example, if you start the upgrade
at 8:00 p.m. and the upg rade takes 90 minutes, set the Start Time field
to 21:30.
!CAUTION:

If you do not disable Alar m Origination, the system may generate

alarms, resulting in unnecessary trouble tickets.

3. Type neither in the Alarm Origination to OSS Numbers field and
press Enter .
NOTE:
For some software loads, set the Alarm Origination
Activated field to n and set the Cleared Alarm Notification
and Restart Notification fields to disable or n before
pressing Enter.
Reconfigure the Tape (G3rV2, V3 R31.0 and Earlier)
NOTE:
Do not issue the list configuration software command before
reconfiguring the removable media.
For some software loads, use 3-mem instead of large
If standard reliability:
1. Type configure tape large and press Enter to reconfigure the backup
removable media for the 2 TN1650B Memory c ircuit packs. This c ommand
takes about 1 minute to compl ete.