DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-16Add the Fiber Optic Cable
6
4. Pull the tool (with adapter and c able attached) out throug h the front of the
cabinet. See Figure 6-7.
Figure 6-7. Fiber Optic Cable and Adapter
5. From the rear, route the fiber optic cab le through the opening vac ated by
the I/O cable connec tor.
6. If necessary, remove the fiber adapter f rom the tool and plug the fib er
optic cable into the SC-SC (single-mode) or ST-SC (multimode) adapter.
See Figure 6-8. Check the house cabling before selecting a c oupling to
use.
7. From the front of the I/O connector adapter bracket (with fiber c able),
snap the coupling into the supplied I/O connector adap ter bracket.
8. Snap the I/O connector adap ter bracket into the I/O c onnector opening .
9. Attach the outside fiber p lant to the I/O connector on the rear of the
cabinet.
lcda6fopRPY 021698