DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-62Add IP Interface Assembly
6
Figure 6-26. TN802B IP Interface faceplate
NOTE:
To properly seat the circuit pack, p ush firmly on the front of the faceplate
until the latch reaches the bot tom rail of the carrier. Then close the latch
until it is fully engaged .
1. Insert the TN802B IP Interface into the rightmost of the three slots you
reserved for it (see Figure 6-27).
When you plug in the TN802B IP Interface, the circ uit pack starts to boot
and the LCD reads PC Boot then after ab out 3 to 4 minutes it changes to
IP TRK *, the default mode.
Figure Notes
1. LCD display
2. Reset button (recessed)
3. Red board status LED
4. PCMCIA card slot
5. Yellow PCMCIA disk-in-use LED
1
2
3
4
5
fpdfmapd KLC 030899