DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-32Install a New EPN Cabinet in an Existing System
6
14. At the rear of the Expansion Control Carrier in position A in Cab inet 2,
install a lightwave transceiver onto Slot 1 (2A01).
15. Connect a 20-foot (6 m) fiber op tic cable to the TX and RX connectors on
the transceiver. Be sure to label the c able.
16. At the rear of the Switch Node Carrier in position E in Cab inet 4, install a
lightwave transceiver onto Slot 20 (4E20).
17. Connect the 20-foot (6 m) fiber op tic cable from the transc eiver on the
Switch Node Carrier position E in Cabinet 4. Be sure the c able connected
to the TX connector on 1 transceiver is conn ected to the RX connector on
the other transceiver and vic e versa.
18. At the rear of the Port Carrier in position B in Cabinet 3, in stall a lightwave
transceiver onto Slot 2 (3A01).
19. Connect a 20-foot (6 m) fiber op tic cable to the TX and RX connectors on
the transceiver. Be sure to label the c able.
20. At the rear of the Switch Node Carrier in position E in Cab inet 4, install a
lightwave transceiver onto Slot 3 (4E03).
21. Connect the 20-foot (6 m) fiber op tic cable from the transc eiver on the
Switch Node Carrier position E in Cabinet 4. Be sure the c able connected
to the TX connector on 1 transceiver is conn ected to the RX connector on
the other transceiver and vic e versa.
22. At the rear of the Expansion Control Carrier in position A in Cab inet 3,
install a lightwave transceiver onto Slot 2 (3B02).
23. Connect a 20-foot (6 m) fiber op tic cable to the TX and RX connectors on
the transceiver. Be sure to label the c able.
24. At the rear of the Switch Node Carrier in position D in Cabinet 4, install a
lightwave transceiver onto Slot 3 (4D03).
25. Connect the 20-foot (6 m) fiber op tic cable from the transc eiver on the
Switch Node Carrier position D in Cab inet 4. Be sure the cable connec ted
to the TX connector on 1 transceiver is conn ected to the RX connector on
the other transceiver and vic e versa.
NOTE:
Continue connecting the f iber cables in this manner until all fib er
connections are made. Be sure to ad d links to PNs in alternating
order (20 and 2, 19 and 3, 18 and 4, and so forth).
26. Connect an H600-278 Metallic Cab le from Slot 1 in the Expansion Control
Carrier in Cabinet 4 (4A01) to Slot 19 on the Switch Node Carrier in
position E in Cabinet 4 (4E19).