DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Upgrading R5si/R6si to R8r EPN and Adding Memory
3-53Release 5/6si to Release 8r
3
Re-record Announcements (TN750/B Only)
1. The off-site STS translation upgrade does not preserve the c ontents of
recorded announceme nts. Therefore, if a TN750/B Announcement circuit
pack resides in the system, re-rec ord the announcements that were stored
on the circuit pack .
NOTE:
If a TN750C resides in the system, re-recording of ann ouncements is
not necessary.
Administer Fiber Links
1. After all fiber optic eq uipment is installed, refer to Chapter A, ‘‘Fiber Link
Administration’’.
Enable TTI
1. Type change system-parameters features and press Enter.
2. On the second screen, set the Enabled? field to y to activate the TTI
feature.
Check Link Status
1. Type display communication-interface links and press Enter.
2. Make note of all enabled links.
3. Type status link <number> and press Ente r.
4. Check the following items and note which links are in-service.
■PPP links
■Audix links
■CMS links at both ends (Also, chec k the recovery time.)
■ASAI links at the DEFINITY ECS end
5. Check that DS1 trunks and BRI phones are function ing normally.
6. Repeat steps 3 - 5 for each enab led link.
Resolve Alarms
1. Examine the alarm log. Resolve any alarms using
DEFINITY Enterprise
Communications Server Release 8 Maintenance for R8r
.