DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-52Add IP Interface Assembly
6
2. Insert the TN802B IP Interface into the right most of the three slots you
reserved for it (see Figure 6-23) and seat it properly.
When you plug in the TN802B IP Interface Assembly, the circ uit pack
starts to boot and the LCD read s PC Boot. The circuit pack reb oots
automatically, and after about 3 to 4 minutes the LCD c hanges to IPTRK*,
the default mode, or MEDPRO*.
If the TN802B is pre-administered at the fac tory, it reboots several times to
initialize to MedPro mode.
If the TN802B is not pre-administered, g o to ‘‘Administration Steps’’ on
page 6-53
NOTE:
For an initial installation, the TN802B IP Interface needs to be
administered first (see ‘‘Administer the IP Interface’’ on page 6-53).
Figure 6-23. J58890MA-1 L30 IP Interface Assembly
45678910111213141516
n
dfmapd KLC 031299
45678910111213141516
indfmapd KLC 031299