DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-14Add the Fiber Optic Cable
6
Install the Pass-thru Kit
1. Snap the SC-SC fiber optic adap ter on the pass-thru tool. See Figure 6-5.
Use the beige adap ter even if single-mode fib er is being installed . The
SC-SC adapter is better suited for c able routing in the next step s.
NOTE:
If single-mode fiber i s being installed, the beige adap ter will be
replaced with a b lue adapter, later in this sec tion.
Figure 6-5. Fiber Optic Adapter and Pass-Thru Tool
2. Slide the tool to the rear of the cabinet. See Figure 6-6.
Figure Notes
1. Pass-thru Tool 2. SC-SC Fiber Optic Adapter
dafocoupRPY 0 6249
7
1