DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-40Remove an EPN Cabinet from an Existing System
6
9. Type change system-parameters features and press Enter. Use this
screen to change the TTI field bac k to its previous value before the
upgrade.
10. When finished, place d ust covers over all exposed fib er couplings that
remain after the fiber optic c ables are removed.
11. If any fiber optic c ables were removed from Lightg uide Interconnect Units
(LIUs) or Fiber Patch Panels, remove the associated c able labeling. This
will prevent confusion if existing fiber is later moved.
12. Return all unused equipment (not owned by the customer) to Lucent
Technologies according to the req uirements outlined in:
BCS/Material Logistics, MSL/Attended Stocki ng Locations
Methods and Procedures for Basic Material Returns
Troubleshooting Message Waiting Lamps On
This usually means that all affected port-related translations were not
unadministered.
1. Type clear amw all <extension> and press Ente r. This clears the message
waiting lamp for the spec ified extension.
2. Repeat the command for eac h extension with a lit message waiting lam p.