DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-95Add a Switch Node Carrier (Standard Reliabi lity)
6
Save Translations
1. Log in at the management terminal.
2. Type save translation disk and press Enter. This instructs the system to
take all translation information in memory and write it to the disk.
3. If the system contains a TN750/B Announcement c ircuit pack, type
display announcements and press Enter .
4. If administered recorded announcements are listed, typ e list
configuration software-version and press Enter. Ch eck screen 2 to find
out when the announcements were last saved. Save the c urrent
announcements by typing save announcements disk and pressing Ente r.
5. Type backup disk and press Enter. This instructs the system to bac kup the
current information on disk to the system tap e(s).
6. Update back up tape(s), if required .
Shut Down DEFINITY LAN Gateway System
If a DEFINITY LAN Gateway system resides in the control cabinet to be
upgraded, p repare to shut down the DEFINITY LAN Gateway assembly and
allow the disk to completel y spin down.
!CAUTION:
Make sure that you save the system parameters if you p lan to reuse the
current system.
!WARNING:
Neglecting to shut d own a DEFINITY LAN Gateway assembly before
powering down the system c abinet where it resides c an damage the LAN
Gateway disk.
1. Log onto the DEFINITY LAN Gateway. S ee the
DEFINITY Communications
System Generic 3 Installation, Administration and Maintenance of
CallVisor ASAI over the DEFINITY LAN Gateway
.
2. When the main menu appears, select
Maintenance
.
3. Select
Reset System
from the
Maintenance
menu.
4. Select
Shutd own
from the
Reset Sys tem
menu.
5. Unseat the LAN Gateway assembly from its bac kplane connecto rs.