DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
555-233-115 Issue 1
April 2000
Adding or Removing Cabinet Hardware
6-72Add IP Interface Assembly
6
3. At the command prompt, typ e ping
nnn.nnn.nnn.nnn
(which is the IP
address of your gateway).
■If everything is config ured correctly, the system responds with the
following message:
Reply from nnn.nnn.nnn.nnn: bytes=32 time<##ms
TTL=###
■If no response, verify the IP address information and check the
connectivity, including the cabling.
■I f all else fails, click on Start > Settings > Control Panel >
Network. Select the Adapters tab and hig hlight the [2] DEC
adapter.
■Click Properties > Change.
■From the Duplex Mode dropd own menu, select a setting that
matches the switch/hub that the TN802B connects to. For example,
10BaseT Full Duplex or 10BaseT No Link Test
4. At the command prompt, typ e ping

nnn.nnn.nnn.nnn

(which is the IP
address of another external c omputer beyond the g ateway).
■If you have connectivity, the system responds with the following
message:
Reply from nnn.nnn.nnn.nnn: bytes=32 time<##ms
TTL=###
■If no response, verify the IP address information and check the
connectivity, including the cabling. Consult your IP network
administrator.
5. Type exit and press Enter.
Test the IP Interface Onboard LAN Connections
To test the onboard LAN connections, ping the IP Interface server and the
processor on the TN802B IP Interface.
1. Click Start > Programs > Command Prompt.
2. Type ping

192.11.13.9

(which is the IP address of the internal IP Interfac e
server).
■If everything is config ured correctly, the system responds with the
following message:
Reply from 192.11.13.9: bytes=32 time<##ms TTL=###
■If no response, verify the IP address information and check the
connectivity, including the cabling.