Polycom DOC2066F manual ISDN/T1

Chapter 3 - Monitoring On Going Conferences

Table 3-2: On Going Conference - Monitor Pane Columns (Continued)

Column	Icon	Indication	Description
Name
Connection		Partial	The connection process is not yet
(cont.)		connection	complete.
		Faulty	The participant is connected, but
		Connection	problems occurred in the
			connection, such as
			synchronization loss.
		Noisy Line	The line of this participant was
			detected by the system as noisy.
			Note: This indicator is used only
			when the automatic noisy line
			detection option was enabled in
			the “system.cfg”.
Network	The type of supported network that the conference is using.
ISDN/T1-
CAS, H.323
or SIP
Participant	Displays the participant and MCU phone numbers or IP address/
Numbers\	alias, depending on the supported network and connection type.
IP Address\	In dial-in connection, displays the CLI number (ISDN) or IP
SIP Address	address/alias of the participant calling the MCU (marked by the
	letter P) and the MCU number or IP address/alias dialed by the
	participant (marked by the letter M). In dial-out connection
	displays the dialed number (ISDN), IP address/alias (H.323) or
	URI(SIP) of the participant.
Connection	Identifies the defined type of participant's connection to the
Type	conference.
		Dial-out	The MCU (conference) dials to the
			participant.
		Dial-in	The participant calls the MCU
			(conference).
		Direct	Leased Line connection (ISDN
		connection	only).

3-12