Polycom DOC2066F manual Ad Hoc Conferencing and External

Chapter 5 - Meeting Rooms and Entry Queues

Table 5-4: Audio Only Entry Queue Properties (Continued)

Field/Option	Description
VTX 1000	Select this check box to create a VTX 1000 enabled
	Entry Queue.
	Participants connecting to VTX 1000 enabled Entry
	Queues are initially assigned wide band resources. If
	the endpoint is not identified as VTX, the wide band
	resources are subsequently released.
Ad Hoc	Select this option to enable Ad Hoc conferencing.
	When selected, an Ad Hoc conference to be created,
	based on the Profile that was assigned to the Entry
	Queue.
	For a detailed description of Ad Hoc options and
	definition, see MGC Manager User's Guide, Volume II,
	Chapter 3, “Ad Hoc Conferencing and External
	Database Authentication”.
	Note:
	• You cannot select the Ad Hoc option if no Profile is
	defined in the system.
	• The Ad Hoc Entry Queue can also be used for
	access to standard conference. In that case, the
	Target Conference Settings defined in the Entry
	Queue are used for connecting participants to the
	Entry Queue.
Profile	Select the profile to be used for the definition of the
	target conference in Ad Hoc conferencing.
	Note: For more details about Profile definition, see the
	MGC Manager User's Guide, Volume II, Chapter 3,
	“Profiles”.
Target	• Audio Only – Select this option for an Audio Only
Conferences	Entry Queue. If Audio Look & Feel mode is
	selected, it is the default setting.
	• IP Only – Select this option to allow only VoIP
	participants to connect to this Entry Queue.
	• Encryption – (applicable with IP Only) Select this
	option to enable only encrypted participants to
	connect to the Entry Queue.

5-16