Polycom DOC2066F manual International Network Specific Subscriber

MGC Manager User’s Guide - VoicePlus Edition

5.If required, define the following parameters:

Table 2-11: ISDN/ATM/MPI/T1-CAS Participant - Advanced

Field/Option	Description
Service Name	Enter the name of the Network Service to be used to
	connect the ISDN/ATM/MPI/T1-CAS participant to the
	conference exactly as it is defined in the Network Service
	list (the system is case sensitive).
	If left blank, the default Network Service is used,
	depending on the selected connection type. For example,
	if the selected connection type is ISDN, the default ISDN
	Network Service is used.
	For more information on Network Services, refer to the
	MGC Administrator’s Guide, Volume II, Chapter 3.
Sub-Service Name	This field is applicable to ISDN participants only.
	If a sub-service is used, enter the sub-service name
	exactly as it appears in the selected Network Service
	definition. If left blank, the default sub-service defined in
	the selected Network service is used.
Num-type	Select the type of program to be used when connecting to
	ISDN/ATM/MPI participants.
	The available options are Unknown; National;
	International; Network Specific; Subscriber;
	Abbreviated; Taken from Service. These options
	represent programs provided by the carrier, and are
	defined in the Network Service. Select Taken from
	Service to indicate that the program should be retrieved
	from the Network Service definition.
Node Type	Select the node type from the drop-down list. The available
	options for ISDN/ATM/MPI participants are:
	• MCU – Select this setting for a dial-out participant in a
	DTMF Enabled Cascaded conference. For more
	details, see MGC Manager User’s Guide Volume II,
	Chapter 1.
	• Terminal (default) – Use this setting at all other times.

2-57