Polycom DOC2066F manual Direct Dial-In Access, Network

MGC Manager User’s Guide - VoicePlus Edition

Direct Dial-In Access

Participants can dial directly into the conference using the following methods:

•Using the MCU dial-in number and defining the participants prior to the conference start. Participants are provided with the MCU dial-in number. When they connect to the MCU they are routed to their corresponding conference according to their Calling Line Identifier (CLI) number.

•Meet Me Per Conference - Assigning a dial-in number to each conference and defining the conference as Meet Me, allowing undefined participants to connect to the conference.

MCU

		9
		2
		5
IP Endpoint		1
		2
		2
		2
	9251222 Network
ISDN/PSTN		3
Endpoint		2
		2
		1
		5
		2
		9

ISDN/PSTN

Endpoint

IP Network Service

Prefix - 925

Conference1 Numeric ID: 1222 Dial-in number: 9251222

Conference2 Numeric ID: 1223 Dial-in number: 9251223

Figure 2-1: Direct Conference Access

The meeting organizer or operator assigns a dial-in phone number to each conference designated as a Meet Me Per Conference or Meeting Room. The conference dial-in number is given to all the conference participants who use it to directly connect to the conference. Using this mode, any participant who dials the conference number can connect to the conference until all the MCU resources are utilized or the maximum number of participants is reached.

The Meet Me Per conference is the basis for the Meeting Rooms definition.

2-9