Polycom DOC2066F manual ISDN/PSTN/T1-CAS Properties and Identification Dialog Box

Chapter 2 - Defining Standard Audio Only Conferences and Reservations

Table 2-10: ISDN/PSTN/T1-CAS Properties and Identification Dialog Box

Field/Option	Description
Participant	This parameter is enabled for the Dial-out connection
Numbers	type, or when the Dial-in Meet Me Per Conference -
	MCU option is selected.
	Type the participant’s number (including country and
	area codes when required) to be dialed by the MCU
	when connecting the participant to the conference.
	If the Meet Me Per MCU option is enabled, the CLI
	number is used to identify the participant and route
	them to the appropriate conference. Enter the
	participant’s CLI number.
MCU Numbers	This field is enabled only to Dial-in, Meet Me Per
	MCU participants. Enter the MCU number as
	allocated to the MCU by the carrier. The dial-in
	numbers are defined in the ISDN Network Services -
	Span dialog box.
	If left blank, when the conference starts the MCU
	automatically assigns a dial-in number from the list of
	numbers defined in the ISDN Network Service.
	Note: During an On Going Conference, the MCU
	numbers are listed in the Network+Phone/IP column
	of the main window Status pane. The format (number
	of digits) depends on how the dial-in numbers are
	forwarded from the PBX switch to the MCU and
	whether the PBX truncates part of the number.

2-52